Networking

floating-ip-add

floating-ip-add [options]

Add new floating IP address (cluster or portal)

Options

--async

Causes the command to be executed asynchronously. A reference task identifier will be returned

--cluster

Add cluster floating IP address. Required unless "--portal" is specified

--help

Display this help and exit

--ip

Floating IP address to add (Required)

--no-timeout

When running a task-based command synchronously, monitor for task completion indefinitely

--portal

Add portal floating IP address. Required unless "--cluster" is specified

floating-ip-remove

floating-ip-remove [options]

Remove existing floating IP address (cluster or portal)

Options

--async

Causes the command to be executed asynchronously. A reference task identifier will be returned

--cluster

Remove cluster floating IP address. Required unless "--portal" is specified

--help

Display this help and exit

--ip

Floating IP address to remove (Required)

--no-timeout

When running a task-based command synchronously, monitor for task completion indefinitely

--portal

Remove portal floating IP address. Required unless "--cluster" is specified

gateway-update

gateway-update [options]

Update gateway configuration

Options

--help

Display this help and exit

--ipv4

Set the gateway IPv4 address

--ipv4-clear

Clear the gateway IPv4 address

--ipv6

Set the gateway IPv6 address

--ipv6-clear

Clear the gateway IPv6 address

--node-name

The node name (Required)

gateway-list

gateway-list [options]

List gateway configuration

Options

--help

Display this help and exit

--node-name

The node name

interface-create

interface-create [options]

Create virtual network interface

Options

--help

Display this help and exit

--interface-id

The physical network interface ID

--interface-name

The physical network interface name

--ip

Set the network interface IP address

--mtu

Set the network interface mtu

--node-name

The node name

--roles

Set the network interface role(s). Possible values: mgmt | data | ha | portal.

--vlan-id

Set the network interface vlan ID (Required)

interface-delete

interface-delete [options]

Delete virtual network interface

Options

--help

Display this help and exit

--interface-id

The virtual network interface ID

--interface-name

The virtual network interface name

--node-name

The node name

interface-list

interface-list [options]

List network interfaces

Options

--full

Print extra information for each element

--help

Display this help and exit

--interface-id

The ID of the network interface to list. Required unless "--node-name" is specified

--node-name

The node name. Required unless "--interface-id" is specified

interface-update

interface-update [options]

Update physical/virtual network interface

Options

--help

Display this help and exit

--interface-id

The network interface ID. Required unless any of the following is specified: --interface-name, --node-name

--interface-name

The network interface name. Required unless any of the following is specified: --interface-id, --node-name

--ip

Set the network interface IP address. Required unless any of the following is specified: --roles, --ip-clear, --vlan-id, --roles-clear, --mtu

--ip-clear

Remove the network interface IP address. Required unless any of the following is specified: --roles, --ip, --vlan-id, --roles-clear, --mtu

--mtu

Set the network interface mtu. Required unless any of the following is specified: --roles, --ip-clear, --ip, --vlan-id, --roles-clear

--node-name

The node name. Required unless any of the following is specified: --interface-name, --interface-id

--override-data-check

Override guardrails preventing change of the original DATA interface IP

--override-ip-check

Override checks preventing duplicate IPs with different netmasks. This override is meant to be used only for two-step subnet swapping procedures.

--roles

Set the network interface role(s). Required unless any of the following is specified: --ip-clear, --ip, --vlan-id, --roles-clear, --mtu Possible values: mgmt | data | ha | portal.

--roles-clear

Clear the network interface role(s). Required unless any of the following is specified: --roles, --ip-clear, --ip, --vlan-id, --mtu

--vlan-id

Set the network interface vlan ID (may change the interface name). Required unless any of the following is specified: --roles, --ip-clear, --ip, --roles-clear, --mtu

static-route-add

static-route-add [options]

Add a new static route

Options

--destination

The static route destination IP address (CIDR notation optional) (Required)

--help

Display this help and exit

--next-hop

The IP address of the next hop (Required)

static-route-delete

static-route-delete [options]

Delete a static route

Options

--destination

The destination IP address of the route to be deleted (Required)

--help

Display this help and exit

--next-hop

The next hop IP address of the route to be deleted (Required)

static-route-list

static-route-list [options]

List static routes

Options

--help

Display this help and exit

subnet-gateway-add

subnet-gateway-add [options]

Add a new subnet gateway

Options

--gateway

The IP address of the subnet gateway (Required)

--help

Display this help and exit

--subnet

The subnet IP address in CIDR notation (Required)

subnet-gateway-delete

subnet-gateway-delete [options]

Delete a subnet gateway

Options

--help

Display this help and exit

--subnet

The subnet IP address in CIDR notation (Required)

subnet-gateway-list

subnet-gateway-list [options]

List subnet gateways

Options

--help

Display this help and exit